Provider

Providers

Nvim delegates some features to dynamic "providers". This document describes the providers and how to install them. E319 Use of a feature requiring a missing provider is an error:

E319: No "foo" provider found. Run ":checkhealth provider"

Run the :checkhealth command, and review the sections below.

Python integration provider-python

Nvim supports Python remote-plugins and the Vim legacy python3 and pythonx interfaces (which are implemented as remote-plugins).

Note: Only the Vim 7.3 legacy interface is supported, not later features such as python-bindeval (Vim 7.4); use the Nvim API instead. Python 2 is not supported.

To use Python plugins, you need the "pynvim" module. Run :checkhealth to see if you already have it (some package managers install the module with Nvim itself).

For Python 3 plugins: 1. Make sure Python 3.4+ is available in your $PATH. 2. Install the module (try "python" if "python3" is missing):

python3 -m pip install --user --upgrade pynvim

The pip --upgrade flag ensures that you get the latest version even if a previous version was already installed.

See also python-virtualenv.

Note: The old "neovim" module was renamed to "pynvim". https://github.com/neovim/neovim/wiki/Following-HEAD#20181118 If you run into problems, uninstall _both_ then install "pynvim" again:

python -m pip uninstall neovim pynvim
python -m pip install --user --upgrade pynvim

g:python3_host_prog Command to start Python 3 (executable, not directory). Setting this makes startup faster. Useful for working with virtualenvs. Must be set before any check for has("python3").

let g:python3_host_prog = '/path/to/python3'

g:loaded_python3_provider To disable Python 3 support:

let g:loaded_python3_provider = 0

python-virtualenv If you plan to use per-project virtualenvs often, you should assign one virtualenv for Neovim and hard-code the interpreter path via g:python3_host_prog so that the "pynvim" package is not required for each virtualenv.

Example using pyenv:

pyenv install 3.4.4
pyenv virtualenv 3.4.4 py3nvim
pyenv activate py3nvim
python3 -m pip install pynvim
pyenv which python  # Note the path

The last command reports the interpreter path, add it to your init.vim:

let g:python3_host_prog = '/path/to/py3nvim/bin/python'

See also: https://github.com/zchee/deoplete-jedi/wiki/Setting-up-Python-for-Neovim

Ruby integration provider-ruby

Nvim supports Ruby remote-plugins and the Vim legacy ruby-vim interface (which is itself implemented as a Nvim remote-plugin).

To use Ruby plugins with Nvim, install the latest "neovim" RubyGem:

gem install neovim

Run :checkhealth to see if your system is up-to-date.

g:loaded_ruby_provider To disable Ruby support:

let g:loaded_ruby_provider = 0

g:ruby_host_prog Command to start the Ruby host. By default this is "neovim-ruby-host". With project-local Ruby versions (via tools like RVM or rbenv) setting this can avoid the need to install the "neovim" gem in every project.

To use an absolute path (e.g. to an rbenv installation):

let g:ruby_host_prog = '~/.rbenv/versions/2.4.1/bin/neovim-ruby-host'

To use the RVM "system" Ruby installation:

let g:ruby_host_prog = 'rvm system do neovim-ruby-host'

Perl integration provider-perl

Nvim supports Perl remote-plugins on Unix platforms. Support for polling STDIN on MS-Windows is currently lacking from all known event loop implementations. The Vim legacy perl-vim interface is also supported (which is itself implemented as a Nvim remote-plugin). https://github.com/jacquesg/p5-Neovim-Ext

Note: Only perl versions from 5.22 onward are supported.

To use perl remote-plugins with Nvim, install the "Neovim::Ext" cpan package:

cpanm -n Neovim::Ext

Run :checkhealth to see if your system is up-to-date.

g:loaded_perl_provider To disable Perl support:

:let g:loaded_perl_provider = 0

g:perl_host_prog Command to start the Perl executable. Must be set before any check for has("perl").

let g:perl_host_prog = '/path/to/perl'

Node.js integration provider-nodejs

Nvim supports Node.js remote-plugins. https://github.com/neovim/node-client/

To use javascript remote-plugins with Nvim, install the "neovim" npm package:

npm install -g neovim

Run :checkhealth to see if your system is up-to-date.

g:loaded_node_provider To disable Node.js support:

:let g:loaded_node_provider = 0

g:node_host_prog Command to start the Node.js host. Setting this makes startup faster.

By default, Nvim searches for "neovim-node-host" using "npm root -g", which can be slow. To avoid this, set g:node_host_prog to the host path:

let g:node_host_prog = '/usr/local/bin/neovim-node-host'

Clipboard integration provider-clipboard clipboard

Nvim has no direct connection to the system clipboard. Instead it depends on a provider which transparently uses shell commands to communicate with the system clipboard or any other clipboard "backend".

To ALWAYS use the clipboard for ALL operations (instead of interacting with the '+' and/or '' registers explicitly):

set clipboard+=unnamedplus

See 'clipboard' for details and options.

clipboard-tool The presence of a working clipboard tool implicitly enables the '+' and '*' registers. Nvim looks for these clipboard tools, in order of priority:

g:clipboard To configure a custom clipboard tool, set g:clipboard to a dictionary. For example this configuration integrates the tmux clipboard:

let g:clipboard = {
      \   'name': 'myClipboard',
      \   'copy': {
      \      '+': ['tmux', 'load-buffer', '-'],
      \      '*': ['tmux', 'load-buffer', '-'],
      \    },
      \   'paste': {
      \      '+': ['tmux', 'save-buffer', '-'],
      \      '*': ['tmux', 'save-buffer', '-'],
      \   },
      \   'cache_enabled': 1,
      \ }

If "cache_enabled" is TRUE then when a selection is copied Nvim will cache the selection until the copy command process dies. When pasting, if the copy process has not died the cached selection is applied.

g:clipboard can also use functions (see lambda) instead of strings. For example this configuration uses the g:foo variable as a fake clipboard:

let g:clipboard = {
      \   'name': 'myClipboard',
      \   'copy': {
      \      '+': {lines, regtype -> extend(g:, {'foo': [lines, regtype]}) },
      \      '*': {lines, regtype -> extend(g:, {'foo': [lines, regtype]}) },
      \    },
      \   'paste': {
      \      '+': {-> get(g:, 'foo', [])},
      \      '*': {-> get(g:, 'foo', [])},
      \   },
      \ }

The "copy" function stores a list of lines and the register type. The "paste" function returns the clipboard as a [lines, regtype] list, where lines is a list of lines and regtype is a register type conforming to setreg().

clipboard-wsl For Windows WSL, try this g:clipboard definition:

let g:clipboard = {
            \   'name': 'WslClipboard',
            \   'copy': {
            \      '+': 'clip.exe',
            \      '*': 'clip.exe',
            \    },
            \   'paste': {
            \      '+': 'powershell.exe -c [Console]::Out.Write($(Get-Clipboard -Raw).tostring().replace("`r", ""))',
            \      '*': 'powershell.exe -c [Console]::Out.Write($(Get-Clipboard -Raw).tostring().replace("`r", ""))',
            \   },
            \   'cache_enabled': 0,
            \ }

Paste provider-paste paste

"Paste" is a separate concept from clipboard: paste means "dump a bunch of text to the editor", whereas clipboard provides features like quote+ to get and set the OS clipboard directly. For example, middle-click or CTRL-SHIFT-v (macOS: CMD-v) in your terminal is "paste", not "clipboard": the terminal application (Nvim) just gets a stream of text, it does not interact with the clipboard directly.

bracketed-paste-mode Pasting in the TUI depends on the "bracketed paste" terminal capability, which allows terminal applications to distinguish between user input and pasted text. https://cirw.in/blog/bracketed-paste This works automatically if your terminal supports it.

ui-paste GUIs can paste by calling nvim_paste().

Paste inserts text after the cursor. Lines break at <NL>, <CR>, and <CR><NL>. When pasting a huge amount of text, screen-updates are throttled and the message area shows a "..." pulse.

In cmdline-mode only the first line is pasted, to avoid accidentally executing many commands. Use the cmdline-window if you really want to paste multiple lines to the cmdline.

You can implement a custom paste handler by redefining vim.paste(). Example:

vim.paste = (function(lines, phase)
  vim.api.nvim_put(lines, 'c', true, true)
end)

X11 selection mechanism clipboard-x11 x11-selection

X11 clipboard providers store text in "selections". Selections are owned by an application, so when the application gets closed, the selection text is lost. The contents of selections are held by the originating application (e.g., upon a copy), and only passed to another application when that other application requests them (e.g., upon a paste).

primary-selection quotestar quoteplus quote+

There are three documented X11 selections: PRIMARY, SECONDARY, and CLIPBOARD. CLIPBOARD is typically used in X11 applications for copy/paste operations (CTRL-c/CTRL-v), while PRIMARY is used for the last selected text, which is generally inserted with the middle mouse button.

Nvim's X11 clipboard providers only use the PRIMARY and CLIPBOARD selections, for the "*" and "+" registers, respectively.